Is there any need to power cycle Netgear Extender every day?
Netgear is a well-known multinational computer networking company that produces networking hardware for businesses, consumers, and service providers. It offers a wide range of technological products, including wireless technology (WiFi and LTE), powerline, and Ethernet, while focusing on reliability and ease-of-use. Netgear products include wired and wireless devices used for broadband access and network connectivity.
Netgear is known for turning ideas into innovative networking devices that are used by millions of people all across the world. It offers highly-advanced Wi-Fi range extenders that you can pair with your router to expand your network coverage miraculously. Netgear range extenders are capable of reaching the Wi-Fi networks even in the dead spots of your home. However, many users are often suggested to reboot or power cycle their Netgear extender whenever they are stuck with any technical glitch. If you’re among those who’re confused about whether it is necessary to power cycle your extender every day or not, you must go through this write-up until the end. Here we have discussed some of the most frequently asked and confusing questions that Netgear extender users often encounter.
Why does Netgear Extender need to be power cycled?
Some of the most common reasons that make it necessary for users to power cycle their extender are slow internet and continuously interrupted Wi-Fi connectivity. Moreover, users also find it compulsory to reboot their extender when it doesn’t work even after completing the Netgear extender setup.
The aforementioned issues occur in most Wi-Fi connectivity electronic devices due to some bugs, overheating, or IP address conflict. Hence, power cycling the Netgear Extender can resolve some common connectivity issues. Moreover, if you need to reboot your device, move forward to the next section of this write-up.
How to power cycle Netgear Extender?
Power cycling the extender is not a difficult task. It includes disconnecting the extender from its main power source and plugging it back to the source. Moreover, the complete stepwise procedure has been mentioned below:-
- First of all, you should disconnect your Netgear extender from the home network.
- After this, turn the device off.
- Now, you should unplug the device from the power socket.
- Then, wait for a few seconds.
- After this, you should plug the device back to the power outlet.
- Now, turn on the power.
- Note: all the users must wait for a few seconds until the power LED light on their Netgear extender turns green.
- Now, connect the Netgear extender to your main router.
- After this, you will be required to log in to the extender by accessing mywifiext.
- Now you are all set to experience uninterrupted Wi-Fi connectivity.
Is it necessary for all the users to power cycle their Netgear Extender every day?
You do not have to power cycle your extender every day. It is required to power cycle it only in certain conditions. A few of the most common situations when you are required to power cycle the extender are mentioned below:-
- When you are not able to access your internet connection on a particular networking device.
- If the Netgear extender is showing amber or red light instead of green.
- When you are not able to access the internet even after setting up the extender via mywifiext.net.
Tips to get rid of the intermittent wireless connection
- It is important to make sure that the Netgear Extender is placed within the Wi-Fi range.
- All the users must make sure that the extender is properly plugged into the power socket.
- The client device must be appropriately connected to the Netgear Extender’s Wi-Fi network.
- Now, open the graphical user interface of the extender using mywifiext.net.
- After this, please provide your email ID, username, and password when prompted.
Note: It is necessary to have the latest version of the range extender firmware.
How to back up and restore the Netgear extender?
In this section of this write-up, we will give the step-by-step process through which the users can back up and restore their Netgear Extender:-
- Firstly, open the web browser and visit the official Netgear Genie setup page.
- Now you’ll be asked to enter the default or personalized username and password of the network.
- After this, click on the “Settings” option located on the left side of the Netgear Genie smart setup page.
- Now, click on the “Other” option to open the other settings.
- On this page, locate and press the “Backup” button.
- Now, save the Wi-Fi range extender settings on your connected device.
Conclusion
In this write-up, we included the essential details about the Netgear Extender. We answered one of the most common queries of all the Netgear extender users, whether they need to power cycle the device daily or not. In addition to this, we have also mentioned some of the important tips that all the users must keep in mind to avoid and resolve common glitches.
How to Update Netgear Router Firmware?
Neatgear Nighthawk IP Address – What is Netgear Router IP?
The 6 Best Wireless Travel Routers of 2022
About Author
