In this guide, you will get complete instructions that you should follow to set up your Netgear Extender via mywifiext net. Go through the entire article and complete the hassle-free setup of your Netgear Range Extender.
Learn how to set up your Netgear Extender through the mywifiext net
In the initial stage, ensure that you have unboxed your Netgear Range Extender and fix the alignments according to it.
Now, you are supposed to take your extender to the same room where your router is placed. This is so because your extender should be within the network area so that you can complete the setup process properly without any issues.
Soon after this, you have to take your extender and simply plug it into the electric socket. Make sure that the electric socket in which you are inserting the extender is running appropriately and getting proper power supply.
By doing so, the Power LED of your range extender turns green. Just in case, you don’t find the green light blinking on your extender, press the power button from your extender and then try to start it again for the extender setup.
To expand or broadens the range of your internet network, you are required to link it to your existing host network. For this, you have two methods explained below.
Wired Connection Method– Use the Ethernet cable and form the stable connection between your router and computer. Here, ensure that the wire you are using should not be damaged otherwise it will interrupt in getting the proper network connection.
Wireless Connection Method- Another way is through the wireless connection which means you can directly link your computing device with the default network name of your Netgear Extender which is Netgear_ EXT.
Following that, access the previously installed internet browser and insert mywifiext.net into the URL bar of your browser.
On the upcoming window, you will be displayed with two distinct options which are Wi-Fi Range Extender and Access Point. Among these two options, you are supposed to opt for the Wi-Fi Range Extender.
Subsequently, you are required to select from the existing network to which you want to extend the network. From the same page, you have to choose the 2.4 GHz host network by tick marking its desired checkbox. Whereas, if you are using the 5 GHz host network also, select the checkbox for it and hit the Next button.
You are then supposed to insert the password for the host network that they have opted in the previous step to set up via mywifiext.
Instantly, you will be taken to a new window, where you have to input the network name SSID or password of your Netgear Extender. In case, you want to customize the SSID network name and password as per your convenience you can do it as per your preference. Otherwise, add the existing network name and password and proceed further by clicking on the Next button.
As a result, you will bring you to the new page where you have to check for the network name and password that you have entered to expand the host network. Once you have verified the details accurately, select the Continue button after connecting to your respected network.
The next step is to detach the extender from the wall outlet and move it to a new location where the signal strength is poor or completely absent.
After this, plug in your extender to a new location and ensure that the power LED light on your extender starts blinking green light. If you get the red light on your extender, it means that there is a poor network connection so plug in your extender closer to your route than its actual position.
Hence, this completes the Netgear Extender Setup using the mywifiext net web address.
What are the issues that you might face while performing the Netgear Extender setup via mywifiext net?
There are several issues that the users might bear while the setup of Netgear Extender through the mywifiext net. Have an overview of some of the issues that are mentioned below.
Unable to access the mifiext.net webpage due to improper network connection or using the inappropriate web address.
The extender is connected but your internet network is not working properly due to poor network connection.
Not getting the accurate range of your existing host network.
Unable to launch the webpage of mywifiext.net Local.
Poor or bad internet network connection.
You are not connected to the right host network connection that you are using at present.
Not able to access the Netgear Genie Smart Setup Page.
Your Wi-Fi Range Extender and Router and not attached properly.
Using the obsolete version of the extender firmware.
Your Netgear Extender is continuously showing the red light.
Issues faced with your Netgear Extender port settings along with the configuration.